Ransome Meteor Four
HI there.
I'm looking at restoring this Ransome Meteor Four lawnmower. The problem is that the magneto is not generating a spark. Now I need to get into the magneto to see what is going wrong. This is where I can't find anywhere on how to remove the guard/wheel around it. I've attached a picture so you know what I'm going on about. The nut/screw on the end won't budge and I can't tell if its a left or right hand thread. Any help would be greatly appreciated as I'm stuck for idea's.
Many Thanks
Charlie
Forums
Hi Thanks for the reply. It
Hi
Thanks for the reply. It is working on my computer. I don't know if I did. Its a JAP 3/26 I think.
Thanks again
Meteor
Can't view the image on the PC either!
Ransomes Meteor 4
Have same mower fully dismantled for restoring it.. Engine is JAP 3/28 and scanned Jap manual for you. .See: https://www.dropbox.com/s/ayg7am645gsmnmh/Jap%20model%203%20type%2028001.pdf
Flywheel nut has R.H thread , it is the nut were the rotating screen is fitted on. It has only 2 flats spanner size approx. 47.5 mm The flywheel is on a straight shaft (no cone to break loose) Please note that flywheel has inspection hole, covered by a plate so you can inspect breaker points without removing flywheel .
N.B. can't view your image.
Meteor mag
Can't view any image on the iPad , will try thr PC. Are you sure that you've posted it correctly?
in the meantime , what engine is it - JAP?